Microwaves Test Benches And Kits

We are ranked amongst the foremost firms that are engaged in manufacturing and supplying a wide range of Microwave Lab Kit 1. The provided lab kit is precisely manufactured and designed using premium quality components and modern technology in sync with set industry standards. Our offered lab kit is used for studying and measurement of the klystron tube characteristics, VSWR and many others. Clients can avail this lab kit from us at market leading prices.
Experiment:
Study Of Reflex Klystron Tube Characterstics.
Frequency And Guide Wavelength Measurement.
Vswr Measurement.
Measurement Of Unknown Impedance.

Specifications:.
 
Components & InstrumentModel No.QuantityComponents & INstrimentsModel No.Quantity.Klystron MountXKM-1411Matched TerminationXtx-1271Klystron tube2k-251S.S tunerXST-1281IsolatorXIS-1401waveguide standXWS-1503Frequncy Meter(DRF)XFM-1421Cooling fanCF-1301Variable AttenuatorXVA-1221VSWR MeterVS-1051Slotted SectionXSL-1231Klystron power supplyKPS-1051Tunable probeXTP-1241BNC cable4Dectector MountXDM-1251Fasteners1setMovable shortXMS-126Experiment Manual1 set

It is a waveguide of suitable length having octal base on the broad wall of the waveguide for mounting the klystron Tube
This Disigne For S band WR 284 Waveguide section .

• Production Capacity: in stock

We are a leading organization engaged in manufacturing and supplying broad assortment of Microwaves Test Benches and Kits, Voltage Standing Wave Ration Meter and Direct Reading Frequency Meter. These products are manufactured using superior quality components and cutting-edge technology. The product range is highly demanded by clients due to features such as high accuracy, easy operation, longer service life, accurate result and excellent functioning. Also, clients can avail the offered products from us in diverse specifications at industry leading prices.

• Item Code: JMWR284
• Production Capacity: in stock
• Delivery Time: 2 weeks

It is a waveguide of suitable length having octal base on the broad wall of the waveguide for mounting the klystron tube. It consists of movable short one end of the waveguide to direct the microwave engry generated by the klystron tube. A small hole located exactly the center of the board wall oft e waveguide is used to put the coupling pin of the tube as the electric held vector of EM energy is maximum at the center only. The maximum power transfer can be achieved by tuning of the movable plunger.

Specifications:

S band Microwave Training kits
WR284 Waveguide section
Frequency Range 2.6 to 3.95 Ghz
klystron base trainer

Detector mounts are used detect the low frequency signal with the help of the IN23 detector Diode. the detector diode is mounted on the broad wall of the waveguide. a shorting plunger is used to tune the max power near the detector Diode.
This is For S band WR284 waveguide

Owing to a long-term destination for our business, we are engaged in offering a wide gamut of Power Supplies. We provide two types of power suppliers for the microwave branches in X-Band. The provided equipments are manufactured using the finest quality components and ultra-modern technology in line with set industry norms. In addition, we also provide these equipments to the clients within a stipulated time frame.

Klystron power supply:

For the Klystron based microwave bench. Klystron power supply generates required beam and repeller voltage for the X-band klystron tube like 2K25. It is very stable and contains the short circuit protection circuit. Also it has amplitude and frequency modulation circuits for the generations of 1 Khz squre wave and the saw tooth wave.

Specificaitons:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by Couriers
• Delivery Time: with in 10 days

An H-plane TEE is a waveguide TEE in which the axis of its side arm is shunting the E-field or parallel to the H-lied of the main guide. It is formed by cutting a rectangular slot along the width of a main guide and attached another waveguide.

Specifications:

We are instrumental in manufacturing and supplying of high quality Gunn Power Supply. Our offered equipment is manufactured using the superior quality component and contemporary technology in compliance with set industry norms. It provides the regulate power supply to operate the gunn oscillator and also contain square wave generator to provide 1 Khz frequency to the PIN modulator for amplitude modulation. Clients can purchase this equipment from us at reasonable prices.

Specifications:

• Production Capacity: in Stock

we are rankedamongst the foremost firms that are engaged in the manufacturing and supplying a wide range of Microwave training kits the provided lab kits is precisely manufactured and designed using premium quality components and modern technology in sync with set industry standards our offered lab kit is used for studying and measurements of klystron tube characteristics, vswr and many others
this kits frequency range  2.6 to 3.95  ghz
S- Band parameters waveguide WR 284

• Production Capacity: in stock
• Delivery Time: 2 weeks

Experiment:

• Dielctric constant measurement of solid dielectric material
• Dielectric measurement of liquid dielectric material
• Measurement of phase shifter
• Measurement of ''''Q'''' if cavity

 

Specifications:

 

• Item Code: JM9003
• Production Capacity: in stock
• Delivery Time: 2 weeks

Experiment:

• Dielctric constant measurement of solid dielectric material
• Dielectric measurement of liquid dielectric material
• Measurement of phase shifter
• Measurement of ''Q'' if cavity

 

Specifications:

Detector mounts are used detect the low frequency signal with the help of the IN23 detector diode. The detector diode is mounted on the broad wall of the waveguide. A shorting plunger is used to tune the max.Power near the detector diode.

Specifications:

• Production Capacity: in stock
• Delivery Time: 2 weeks

We are the eminent name in designing wide range of Microwave Lab Kit III for our clients. Owing to its outstanding performance, our provided lab kit is used for performing various experiments in labs of colleges and various industries. This lab kit is designed and manufactured using the finest quality components with the aid of latest technology. In addition, we also provide this lab kit to the clients within a promised time frame.

Experiment:

• To study magic tee,
• Directional coupler isolators & circulators
• To measure characterstic of detector diode
• To study attenuation measurements.
• To study the return loos measurements.

 

Specifications:

 

 

An E-plane tee is a waveguide tee in which the axis of its side arm is parallel to the E field of the main guide. If the collinear arms are symmetric about the side arm, there are two transmission characteristics. When waves are fed into the side arm, the wave appearing in collinear arms will be in opposite phase and in the same magnitude.

Specifications:

These are used to obtain a phase reference in the calibration of various experimental set-up and are also used to very the effective plane of reflection therefore the phase of reflected wave. These are also useful in impedance measurement.

Specifications:

• Item Code: XMS126
• Production Capacity: in Stock
• Delivery Time: 2 weeks
• Packaging Details: extra charges

We have marked a distinct and dynamic position in the market by providing a high quality array of Tunable Probe. The provided probe is used for detecting the low frequency square wave modulated microwave signal. This probe is made with the help of crystal diode mounted in the transmission line. Our offered probe is also available in various specifications to cater different demands of the clients.

Specifications:

• Item Code: XTP125
• Production Capacity: in stock
• Delivery Time: 2 weeks
• Packaging Details: extra charges

Our organization has successfully expanded its business in market owing to the offered elevated quality array of Direct Reading Frequency Meter. The provided frequency meter is used to measures the frequency directly. This frequency meter is constructed from a cylindrical cavity resonator along with a variable short circuit termination. The shorting plunger is used to vary the resonance frequency of the cavity by varying the cavity length.

Specificaitons:

• Production Capacity: in tock

this is Micrometer Type Frequency Meter
For S band WR 284  Waveguide
this is Micrometer Type Frequency Meter
For S band WR 284  Waveguide

Microwave apparatus is used for study of Wave Phenomenon of the radiation produced, because its properties are very similar to those of light.
In the present setup, used for the students to understand and learn the basic concepts of wave phenomenon. Demonstration of wave nature e.g., reflection, refraction, Polarization, Interference and diffraction of the radiation produced, can be done using this kit.

Contents: